Spread Axle Bolt Broke - Help!
The bolt in the middle seems to have broken. The washer/nut have disappeared. The whole assembly appears to be angled now. I'd like to try to remove the bolt and replace on my own. Can I just remo...
Forum Discussion
Jack up the frame until the pressure is relieved from the equalizers (the linkages hooked to the springs on either side of the bolt) Then use a hammer and drift pin or punch to drive the bolt out. Replace with a new splined bolt and drive the head in until it's seated in the hole. Do not turn the bolt head as you will strip the splines. Only turn the nut to tighten or loosen the bolt.
