Stable Lift for dually trucks
I figured I would start a new topic for anyone who might have questions about how a stable Lift works on a dually.
Forum Discussion
burningman wrote:
Well not necessarily. Your truck is over 8’6” wide at the mirrors, which stick out further than the Stable Lift. It’s not really certain if the lift is one of the excepted pieces of hardware that can extend beyond the standard 6’6”.
When you mount a dually Stable Lift, you choose your own width, it’s adustable. The main concern is how tight you want the clearance between it and your fenders. Too close is almost guaranteed to be trouble waiting to happen.
I found that 107” wide (total to the outside) was my happy place.
It has never been an issue, nor is it the widest piece of hardware on the truck.
I was going to go a little wider for comfort sake. I wish I would have, but at 106, after a few times putting her in in my driveway... I have pretty much calculated where the truck needs to be to get it on in one back up without wiping out the fenders. LOL. At least so far so good.
