Tie Downs for stepside pickup

The exact text is "NO BED-STEP SIDE," which in normal English would mean "either the truck has no bed, or it is a step side."

If they were not for step side, then why wouldn't it say "NOT FOR STEP SIDE?"

Seriously, I think they'd fit. The minimum-wage call-answerer (i.e. not really tech support) doesn't know what they're talking about. Now if Mr. Torklift himself told you this, then I might be inclined to believe it.

mkirsch wrote:
???

Torklift lists them specifically for step-side F150 pickups!

http://www.torklift.com/fitguide.php?v=3&id=81&rboards=no&hitch=r_ez&cyear=2007&chosen_make=1&chosen_model=1

check your link again and this time read between ( ) "NO BED STEP SIDE" but thanks for playing. I will just go with the fact that I talked to tech support at Torklift and they DO NOT have them.

???

Torklift lists them specifically for step-side F150 pickups!

http://www.torklift.com/fitguide.php?v=3&id=81&rboards=no&hitch=r_ez&cyear=2007&chosen_make=1&chosen_model=1

Spoke with tech support of all 3 tie down vendors. Nothing off the shelf will work with a step side pickup. Off to the fab shop. Thanks to everyone for the info.

BamaBen wrote:
Thank you all for your input. I have added a photo of my rig so that it may give a better idea of what I am up against. I have come to realize whatever I go with will have to be retrofit for my application.

I looked at the picture of your rig in your profile.

What, exactly, are you "up against?" You don't have any odd protrusions or ground effects on that truck, so I don't see where your perceived problem is...

Torklift tiedowns bolt to the FRAME of the truck, and do not contact the bed. They will work fine for your application.

We have Torklifts. Since they bolt to the frame, I would think that what (standard) bed you have shouldn't matter.

Even a modified bed shouldn't matter if it is no wider than the cab and doesn't protrude below the bottom edge of the cab, which a step side pickup bed does not.

Give Torklift a call. I think they'll agree. If not, please let us know why.

You won't be able to use the HJ setup since Ford left almost no room between the cab and bed on those trucks.

I do have to second the comment about 1/2 ton trucks not making good TC haulers. Which is one reason there isn't much in the way of tie-downs made for them. You should probably contact Torklift about what might work.

Half tons and TC's usually don't mix.

Thank you all for your input. I have added a photo of my rig so that it may give a better idea of what I am up against. I have come to realize whatever I go with will have to be retrofit for my application.

Torklift frame mounts should work, but you may need the longer designed for length floorboards.