Tie switch into existing light
My Current TT has a switch on the control pad to turn on the over head lights in the living area, but that is the only switch. The other lights (all LED) have a little button in the middle to press a...
Forum Discussion
You have to run a wire from where the light is to where you want the switch to be. Get a switch and a box (if necessary) and mount the switch in the wall. Connect up the wires properly and your done. Easier said then done. The hard part is running the wire between the two and mounting the switch (if you are at all concerned about aesthetics), connecting the wires is a 10 minute job.
