Trailer Life Article - 5.9 Cummins engine

DirtyOil wrote:
my 2005 had 265,000km or 165,000miles on her when I sold it, I can not tell a lie... I pulled the injectors out at apporx 100,000km...
to install 50hp nozzles... far as I know the new owner still running those same injectors.

P.S. I have a cousin who wrenches on feet... she says male toe nails are the worse! :B

Especially the ones with blue polish on em :B

Cummins12V98 wrote:

john&bet wrote:

Cummins12V98 wrote:

FishOnOne wrote:

ib516 wrote:
OK Troy, whatever you say. We all know you take every opportunity to say the Cummins diesel is junk. That's fine. Pretty sure that opinion is contrary to most people's opinions and experiences.

But hey, we are all allowed to have our opinions. :)
Carry on...:B

OK Ian... I've owned 05 Dodge and my cousin wrenches on them. Injectors on these common rails fail more than your internet buddies report. :W

People with the 03-07 5.9 Cummins should be running as small of a micron fuel filter as possible if they want to make it past 150K.

Cummins12v98, I call that statement bull. '04.5 with 163k and still all original injectors and lift pump. Pulling out in 2 weeks for a 7week,5k trip and I have no worries. JME

Say bull all you want but you talk to Dynomite Diesel or any Bosch injector shop and they will tell you the same.

Like everything there are variables. So you won't run a 4 micron filter if it will help your injectors run longer?

There are several things one can help prevent or fix on a Cummins if they so choose.

1. replace starter contacts before it won't disengage and burn up wiring

2. replace lift pump on 98-02 24 valve before the lift pump takes out the injection pump.

3. Tab killer dowel pin before it comes out and damages the timing case.

There are several more but bury your head and roll the dice. I don't I fix things before they become a problem.

No need to talk to after market shops. I just go up the road 20 miles to OEM shop along US-31 with the big "C" on the sign. Or talk to people I know in the big "C" Tech Center. Have a good day.

Cummins12V98 wrote:

john&bet wrote:

Cummins12V98 wrote:

FishOnOne wrote:

ib516 wrote:
OK Troy, whatever you say. We all know you take every opportunity to say the Cummins diesel is junk. That's fine. Pretty sure that opinion is contrary to most people's opinions and experiences.

But hey, we are all allowed to have our opinions. :)
Carry on...:B

OK Ian... I've owned 05 Dodge and my cousin wrenches on them. Injectors on these common rails fail more than your internet buddies report. :W

People with the 03-07 5.9 Cummins should be running as small of a micron fuel filter as possible if they want to make it past 150K.

Cummins12v98, I call that statement bull. '04.5 with 163k and still all original injectors and lift pump. Pulling out in 2 weeks for a 7week,5k trip and I have no worries. JME

Say bull all you want but you talk to Dynomite Diesel or any Bosch injector shop and they will tell you the same.

Like everything there are variables. So you won't run a 4 micron filter if it will help your injectors run longer?

There are several things one can help prevent or fix on a Cummins if they so choose.

1. replace starter contacts before it won't disengage and burn up wiring

2. replace lift pump on 98-02 24 valve before the lift pump takes out the injection pump.

3. Tab killer dowel pin before it comes out and damages the timing case.

There are several more but bury your head and roll the dice. I don't I fix things before they become a problem.

4. Delete (At your own risk) all the emissions******(ie DPF/EGR). Every hot shot truck I see has some how lost the DPF. :h

I believe improved fuel filtration can only help, but not limited to. I'm not sure what are the tolerances of the parts inside a injector, but I bet they're much tighter than engine parts. Add in minimal lubrication from ULSD, Pilot injection (cycles your injectors 5X compared non Pilot injection engines) and a fuel filter that passes some solids to your injectors so injectors do fail for various reason.

FishOnOne wrote:

Perrysburg Dodgeboy wrote:
Thank the Lord I made it home last night! Tory WTH buddy no PM with your phone number incase I brake down? Man that's cold brother....just cold :W:B

Don

You're an entertaining fellow Don. But just so you know back in '12 I stopped on I-10 on 2 occasions to assist some RV'ers who were broken down and sitting on the shoulder.

BTW... Those 2 trucks were 6.7 cummins. Just so you know. :W

Drunk behind the keyboard is more funny, and safer, than drunk behind the wheel, in a Dodge P/U. Those Dodge Boys know how to party on the job, without getting fired for it.

john&bet wrote:

Cummins12V98 wrote:

FishOnOne wrote:

ib516 wrote:
OK Troy, whatever you say. We all know you take every opportunity to say the Cummins diesel is junk. That's fine. Pretty sure that opinion is contrary to most people's opinions and experiences.

But hey, we are all allowed to have our opinions. :)
Carry on...:B

OK Ian... I've owned 05 Dodge and my cousin wrenches on them. Injectors on these common rails fail more than your internet buddies report. :W

People with the 03-07 5.9 Cummins should be running as small of a micron fuel filter as possible if they want to make it past 150K.

Cummins12v98, I call that statement bull. '04.5 with 163k and still all original injectors and lift pump. Pulling out in 2 weeks for a 7week,5k trip and I have no worries. JME

Say bull all you want but you talk to Dynomite Diesel or any Bosch injector shop and they will tell you the same.

Like everything there are variables. So you won't run a 4 micron filter if it will help your injectors run longer?

There are several things one can help prevent or fix on a Cummins if they so choose.

1. replace starter contacts before it won't disengage and burn up wiring

2. replace lift pump on 98-02 24 valve before the lift pump takes out the injection pump.

3. Tab killer dowel pin before it comes out and damages the timing case.

There are several more but bury your head and roll the dice. I don't I fix things before they become a problem.

Perrysburg Dodgeboy wrote:
Thank the Lord I made it home last night! Tory WTH buddy no PM with your phone number incase I brake down? Man that's cold brother....just cold :W:B

Don

You're an entertaining fellow Don. But just so you know back in '12 I stopped on I-10 on 2 occasions to assist some RV'ers who were broken down and sitting on the shoulder.

BTW... Those 2 trucks were 6.7 cummins. Just so you know. :W

my buddys at work have blown them out of the block, but they spin them faster then most, with 4k governor springs the water pump is really spinning, their is a blocker plate that is bolted across that takes care of this problem.. i dont believe their are many trucks that neglected that the plugs rot out from the inside, but I have seen many MI trucks used in snow plow business that i would not be surprised they did not rot from the outside

Thank the Lord I made it home last night! Tory WTH buddy no PM with your phone number incase I brake down? Man that's cold brother....just cold :W:B

Don

Cummins12V98 wrote:

FishOnOne wrote:

ib516 wrote:
OK Troy, whatever you say. We all know you take every opportunity to say the Cummins diesel is junk. That's fine. Pretty sure that opinion is contrary to most people's opinions and experiences.

But hey, we are all allowed to have our opinions. :)
Carry on...:B

OK Ian... I've owned 05 Dodge and my cousin wrenches on them. Injectors on these common rails fail more than your internet buddies report. :W

People with the 03-07 5.9 Cummins should be running as small of a micron fuel filter as possible if they want to make it past 150K.

Cummins12v98, I call that statement bull. '04.5 with 163k and still all original injectors and lift pump. Pulling out in 2 weeks for a 7week,5k trip and I have no worries. JME

my 2005 had 265,000km or 165,000miles on her when I sold it, I can not tell a lie... I pulled the injectors out at apporx 100,000km...
to install 50hp nozzles... far as I know the new owner still running those same injectors.

P.S. I have a cousin who wrenches on feet... she says male toe nails are the worse! :B