Using truck camper when not attached to truck
I recently bought a 1985 sun lite truck camper. I want to be able to take it out of my truck when i get to where I am going and use it when its out of the truck.This particular camper only has three j...
Forum Discussion
mountainkowboy wrote:The x stands support the floor , the 2x6' s support the edge so it depends on what the camper needs . Both will steady the camper .mkirsch wrote:
3/4" plywood "X-stands." Just take a 4x8 sheet of plywood, cut into four 24"x48" pieces. Cut half-slots in them so they fit together to form an X. Stores flat under the camper, takes up no space traveling. The boards and jacks described above need storage space.
I'll keep my 2x6's and screw jacks, the X-stands will work, but don't allow any adjustment for ground that isn't level.
