Water Leak, Repair Update Feb 12th
Well, here we go again. Back in 2013 I found a leak that was deteriorating the slide out floor, so I undertook those repairs. I had a thread on here but couldn't find it again to give you a link, bu...
Forum Discussion
The mfr was thinking it was cheaper...LOL....at least they glued and stapled the OSB to the 2x3 floor joists so it stiffened it up quite a bit.
John, I used the rubber spray on my slide out repair from 2013. On the outside wall of the slide, there is a 2x4 that attaches to the slide frame and the wall sits on that. The factory had it wrapped in Darco and stapled to death...water got in there and rotted it out. I replaced that 2x4 and sprayed it the rubber coat and it's holing up well, not peeling or showing any signs of cracking or failing. I'll post a pic when I get back to this project. I have another issue I am dealing with on the slide and will post pics on that as well. It' supposed to warm up this weekend, and I should be out of the woods with this flu by then.
John, I used the rubber spray on my slide out repair from 2013. On the outside wall of the slide, there is a 2x4 that attaches to the slide frame and the wall sits on that. The factory had it wrapped in Darco and stapled to death...water got in there and rotted it out. I replaced that 2x4 and sprayed it the rubber coat and it's holing up well, not peeling or showing any signs of cracking or failing. I'll post a pic when I get back to this project. I have another issue I am dealing with on the slide and will post pics on that as well. It' supposed to warm up this weekend, and I should be out of the woods with this flu by then.
