Wave Heater Install
I found a way to install my Wave Heater so it is off the floor. The hose is T'd off of the stove and ran it through the stove floor using threaded PVC. Then the hose runs to the front throug...
Forum Discussion
I installed Wave 3 in one of our lower storage doors. I removed the door, cut plywood the size of
door, cut out size of Wave 3 to offset it back into door. Added wood lip above heater to make sure that the refrigerator above the heater would not get excess heat. Stained new door and added extra hinges and door lock.
Added T into gas line with valve for heater.
I have purchased the Wave 3 cover to keep dust off of it. I’ve added this for the ski season and will most likely take it out and put the original door back on for the summer.
door, cut out size of Wave 3 to offset it back into door. Added wood lip above heater to make sure that the refrigerator above the heater would not get excess heat. Stained new door and added extra hinges and door lock.
Added T into gas line with valve for heater.
I have purchased the Wave 3 cover to keep dust off of it. I’ve added this for the ski season and will most likely take it out and put the original door back on for the summer.
