Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
(Sorry cant seem to be able to post more than 1 photo at a time)
On top is another sheet of 1/2 ply once again epoxied and painted
So.....I have a question...My wings are complete, before I go any further. What are you guys using for tie-down points. Are the jack stand brackets being used or do I need to install separate tie-down hooks?
Could I used an 'eye bolt' for one of the jack mount bolts. My stands are going to be bolted through 2 sheets of 3/4 ply with a piece of 1/8th aluminium plate between jack and the body on the outside.
Inside the bolts go through alum plate also.
On top is another sheet of 1/2 ply once again epoxied and painted
So.....I have a question...My wings are complete, before I go any further. What are you guys using for tie-down points. Are the jack stand brackets being used or do I need to install separate tie-down hooks?
Could I used an 'eye bolt' for one of the jack mount bolts. My stands are going to be bolted through 2 sheets of 3/4 ply with a piece of 1/8th aluminium plate between jack and the body on the outside.
Inside the bolts go through alum plate also.
