Derflure
Explorer
Joined 5 years ago
User Profile
User Widgets
All Activity
Thomas Payne move
I found the manufacture of my Sporttrek for my Thomas Payne chairs had not properly installed the chairs. While I was moving them I had to unplug the chairs to get to the back. When I plugged them back in the heater and vibration works but I cannot get the blue accent lights to turn off. I also noticed that the brick that come with them are different and off by .5 volts, Im not sure that matters (it doesn't). Update: I have my wires mismatched on the left chair, see my picture for the correct plug-ins on left sectional. This is the setup for the center piece not powered. Plug your power into the green plug and the rest as shown.730Views0likes0CommentsSporttrek TV mount move
I have updated my 2 new Sporttrek TT with updated smart TV's in both the outdoor location and above the entertainment area inside. When I considered the size I ensured the length and width right but I forget about the location of the screw holes on the back of the TV. The location of the screw holes has moved my TV down and has caused it to block the outdoor accent light, and leave no space under the entertainment center. Will there be a issue with me moving the mount up 3" inches to clear the bottom? I have plenty of vertical space and only need around 3 to get it to clear at the bottom of the TV. Is there something to mount to 3 inches above the mount? Attached a picture for reference, you can see that the bottom of the TV would hit the blue light. Thanks Newguy1.2KViews0likes1Comment
Groups
Travel Trailer Group
Prefer to camp in a travel trailer? You're not alone.Jan 21, 202544,029 Posts
