CampinEarls
Explorer
Joined 15 years ago
User Profile
User Widgets
All Activity
Re: Where to purchase graphics. Keystone Bullet
OH48Lt wrote: graphicsrv dot com All kinds of graphics available. That’s a pretty neat site, they don’t have any Bullets in their system but I emailed them to see if they can add it, they also have generic sets that look pretty nice for around $500.392Views0likes0CommentsWhere to purchase graphics. Keystone Bullet
My 2010 Bullet Premiere is starting to look pretty rough with the graphics shrinking, fading and peeling. I would like to see if I can purchase new graphics, or at least see what it would cost to get the original style ones, but I can’t find anywhere to get them. I thought I had read on here before where someone had bought them but I can’t find anything with a search. Anyone have ideas of any websites that sell parts and may have the graphics? Thanks!1.4KViews0likes8CommentsRe: Keystone Bullet Premier
mtmcj wrote: Well I spent the weekend rebuilding the door. No more wood in there now, I used 1" thick dow corning super tuff rigid foam board, put two aluminum channels in the foam they where 2 1/2" wide by 46" long with a 1/2" intrusion into the foam. A sheet of white aluminum for the inside and reused the filon siding for the outside. Glued it all together with 3m 90 industrial adhesive. Less than a $100 in material and 1 1/2 days of work. oh and sealed up the outside channel with dap 230 clear sealant. Door is lighter than factory and if anything more rigid. Looks good and works great Now if any water gets in there it will not rot. Only concern is the struts are a little strong for the door now but I will keep my hand on it when opening. Now to seal the crack in the toilet. Awesome! I still need to fix mine, it's holding with the long brace I've screwed onto in it for the left side bracket, but it's just a matter of time before that gives.860Views0likes0CommentsRe: Keystone Bullet Premier
pyro383 wrote: Where has everyone gone to purchase tires? Make/Price. Did you bring the camper down or did you bring the tires down to be changed off the rims. I got mine and my boat trailer tires at Discount Tire. I took the wheels off myself for the camper, it was easier for me to do that and drop them off after work and such, but took my boat trailer to them, because I had time to wait for them to do all the work.409Views0likes0CommentsRe: Keystone Bullet Premier
pyro383 wrote: I was able to purchase a set from them. Did you offer to pay? if you don't mind telling me, did you get a whole set for the entire camper, and how much it costs? My decals on the whole thing look like ****, shrinking, peeling edges, fading....482Views0likes0CommentsRe: Keystone Bullet Premier
I measured the door, The actual door is 29", outside frame to frame is 31 1/4". When my door is all the way up till the little lock handle is touching the wall there is a 3/4" gap between the door and wall, you could get away with a 1" something and still latch it up. I wish it was easier to post photos here, I took a couple but I'll have to load them to photobucket and post them, the way my hinge is it kind of crests a drip rail above my door.296Views0likes0CommentsRe: Keystone Bullet Premier
I'll measure mine in the morning for you if you don't get the measurement before then. I will also check to see what kind of clearance is there when it is opened all the way and latched. My left side door does this sometimes but the door itself hasn't gotten wavy or anything, on mine water pools up between the bottom of the door and the housing.296Views0likes0CommentsRe: Keystone Bullet Premier
coobrey wrote: I have a 31bhpr, and it really squats the rear end of my 2005 Excursion. It drops the ball 3 3/4" inches when the trailer is attached (without my equalizer brand distribution hitch attached). Even with the distribution hitch attached I have quite the squat in the rear. Just yesterday I swapped out the stock Excursion springs for those that were on a F350 (c-code, 3000lb each). I STILL get a 3 3/4" drop when I attach the trailer. Now the F350 springs gave me an 2 1/4" increase to start, but it still drops a lot. I haven't hooked it up with the equalizer hitch yet so I am hopeful that some change will have come from the spring swap. Is anyone else seeing this with their trailer? I don't even have the water tank 1/2 full right now. Thanks for any info. That sounds completely normal to me, I would think it would come back up a couple inches after you attach WD bars. I don't think you needed to swap the springs, I would have seen what it looks like after you get the WD all set up and dialed in first.395Views0likes0Comments
Groups
Bucket List Trips
Bucketlist destinations you just can't miss. Which spots stick with you?Jan 18, 202513,487 Posts RV Families
Activities, advice, and destinations for those traveling with kids!Oct 09, 2024501 Posts Travel Trailer Group
Prefer to camp in a travel trailer? You're not alone.Jan 19, 202544,029 Posts
