All ActivityMost RecentMost LikesSolutionsFor Vogue EnthusiastsIf there are any Vogue enthusiasts out there who are also on Facebook, take a look at this group. Lots of fine folks who love Vogues from the 70's. 80's and 90's. Check us out, we'd love to have you join us! Vogue Motor Coach Owners and Fans ClubRe: No power to leveling jacksI am relieved to report that I finally got my leveling jacks repaired. After talking to the tech from HWH and getting his ok, I just ran a new 12v line straight to the control panel and called it good. I'm so glad to be done with that! Thanks for everyone's input, I really appreciate it!Re: No power to leveling jacksThank you,Gjac. I called hwh this morning and they said I should be hearing from a tech very soon, so I guess I'll wait a couple more days. I'm hoping I'll get them fixed eventually! In the meantime, I'll go back to their website and see what else I can find out. Thanks again!Re: No power to leveling jacksThanks for replying, even though I'm somehow posted this in the wrong place. It seems like I have looked everywhere, but I'll sure look around the air cleaner again. That should be a lot easier than standing on my head looking under the dash!No power to leveling jacksI have a 1994 Vogue Prima Vista diesel pusher, with the HWH 100 series leveling jacks. The control panel is separate from the levers. For some reason, I do not have 12v power to the control panel, either with the key in ACC or ON. I applied 12v from a separate battery, and the control panel, pump and jacks worked fine. I put a volt meter on the 12v line coming in and got nothing. Chassis battery is fine, no other electrical issues with the coach. I have attempted to trace the 12v line as far back as I can, in an attempt to find a fuse or loose connection, but I haven't found anything to this point. I have also tried to find loose ground wires, but no luck there, either. The fuse in the chassis panel which includes the jacks is good. What am I missing? Is there a fuse I haven't found? I have seen references to a "control box" in some posts. Does the 100 series have a control box in addition to the control panel or is this only on newer systems? Thanks for any suggestions anyone might have. By the way, I do have a call in to HWH and am waiting for a call back.