sjturbo
Explorer
Joined 21 years ago
User Profile
User Widgets
All Activity
Re: Landing gear/jack problem
I'm not an expert by any means. I had the same binding issue. Mine was my fault. The inside consisted of a captive nut that the threaded rod moves up and down through. If the rod, or the square tubing gets tweaked, (even a slight bend), it will start to bind. That results in an increased load on the motor and drawing more amperage and blowing the fuse. Worse is the stress it puts on the threaded rod. That can result in the rod breaking,(which mine did) with very dangerous results. I would not hesitate to replace the leg!! Those legs are lifting a lot of weight!! I increased my weight by going from 1 70lb battery to 4 63lb batteries. Hope this helps!284Views0likes0CommentsRe: LED strip light install
Thanks for linking! I connected directly to an open 12V circuit on my converter > 14g silicone wire to the terminal block > terminal block to LED receiver > LED receiver to 16' LED extension via internal channel for the awning power > to LED light strip, (siliconed connection). Located the hole and connection for the running light. Drilled a small hole in the running light plate and ran the remote sensor to the hole. Done. I left out the 2hours plus that I used an electrical fish tape to run the 16' extension through the horizontal frame channel that was used for the awning power. Hope this helps.571Views0likes0CommentsRe: LED strip light install
This should include all the parts I used. Except for the 9v adapter cable which I had from my guitar pedal spares. LED Strip https://www.amazon.com/gp/product/B07GB5RMC4/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1. https://www.amazon.com/gp/product/B01G6Q9S54/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B07FMTCHC1/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B01CG2HI0E/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 Couple of additional pics571Views0likes0CommentsRe: Peanut butter sauce
Well I do like to make PB sauce but I just use the "mixed" peanut butter. I know that the "oil" on the top of natural peanut butter is usually mixed with the contents. Otherwise it is very hard to spread. Soy sauce and ginger sounds like a great addition!135Views0likes0Comments
Groups
Bucket List Trips
Bucketlist destinations you just can't miss. Which spots stick with you?Jan 18, 202513,487 Posts Chefs on the Road
Campground recipe recommendations, restaurants, and more!Jan 01, 20252,135 Posts Fifth Wheel Group
Interested in fifth wheels? You've come to the right spot.Mar 07, 202519,008 Posts Motorhome Group
Join in here to discuss all things motorhomes.Mar 06, 202538,708 Posts RV Families
Activities, advice, and destinations for those traveling with kids!Oct 09, 2024501 Posts
