All ActivityMost RecentMost LikesSolutionsRe: Poor pump pressureyou may also have a filter on the input side of the pump and it may be clogged.Re: Macerator pump not working???You should hear the macerator pump running when you press the button located in the driver door jam. Some say not to run the pump when dry. First check the fuse for the macerator in the fuse panel. Mine is a 20 amp (yellow) fuse. Second if it is good, there is a rod with a black knob next to the dump valve handles. Operate it, (push in) and turn CLOCKWISE. This may release a stuck impeller. Good luck.Re: May purchase Roadtrek with odometer in kilometersSince this Roadtrek is in Kph it may not be able to pass California smog testing. Be sure to check this out.Re: Third times the charm?If you have a Cummuns/Onan there is a Cummins shop near the airport off I40. I have had work done at Cummins Midsouth in St. Louis and work was excelent. Just make an appointment first but they may be able to fit you in. Good luckRe: third passenger bed for Popular 210 (2010)We have a 2007 Roadtrek 210 P and have used the third seat bed since purchase new. Our daughter, about 5' is the one that uses it. We store the mattres on the street side twin bed made up from the motorized couch. Has worked for us. If we want to relax on the twin bed we place the mattres between the two front seats.Re: Half Blown Fuse?Yes. Absolutely. If you use a 250 volt fuse in a 12 volt circuit it will not blow (separate) the element far enough.
GroupsMotorhome Group Join in here to discuss all things motorhomes.Mar 08, 202538,709 PostsRV Newbies We all start out new. Share lessons learned or first-time questions!Mar 08, 20254,028 Posts
RV Newbies We all start out new. Share lessons learned or first-time questions!Mar 08, 20254,028 Posts