LA48340
Explorer
Joined 15 years ago
User Profile
User Widgets
All Activity
Satellite Signal Mirroring
We have Winnebago View with Dish Network. One receiver-two TVs. The front TV is connected to the receiver via HDMI. Works great. How can I get the rear TV to view the same as the front. The HDMI input choice on the rear TV gives no picture. I called Dish Network. They said there is something called mirroring using a splitter. How can this be connected to generate a sat receiver out signal for the rear. The Receiver is RF remote so channel changes can be made from the rear of the camper. thanks for any help.899Views0likes3CommentsRe: Progressive Dynamics charger PD4045
OK..the way I see this then: Both the AC ground (bare wire buss) and the Batt (-) converter lug go directly to chassis ground on separate wires. Then one wire from the battery (-) to that same ground point on the frame. It seems with the PD directions provided..you have to guess what the designers intentions were or be an experienced RV tech. I am not the later just trying over-do a little trailer with a workbench in the nose.907Views0likes0CommentsProgressive Dynamics charger PD4045
I am trying to wire up PD4045 "Mighty Mini" in a 10' utility trailer/workshop. I have the AC side figured out. On the 12 V side....there are 12 wires coming off the fuse bar. 2 red are for 30 amp...10 black are for 20 amp uses. I have the battery grounded to the chassis. There are 2 lugs on the 12v side for battery + and -. Does the charger get its ground from someplace other than the batt -? With this connection eliminated I still get output on all the 12V feed wires. Without both battery + and - wires connected don't see how the battery is supposed to charge. I wrote to PD..they told me there are no neg connections needed and told me to consult an RV specialist. thanks for any insight.12KViews0likes9CommentsWinegard Traveller Power requirements
Installed a Winegard Traveller SWM-3 dish on our toy hauler. Would like to power it using an inverter when shore power is not available. Wondering what size inverter would be sufficient to power the 110V drive system power inserter. Have an inquiry into Winegard but wondered if anyone might have some experience with this set up. thanks1.2KViews0likes7CommentsWave 3 Propane Heater
We have a 2008 18LT Work and Play. Would like to install a Wave 3 propane heater and wall mount it next to the stove/refrigerator at the entry on right. This location is close the 3 burner cook top and could provide access to gas. Can the gas line leading to the cook top regulator be cut and tee'd to supply the Wave 3. Not sure about the flares required to the gas line to connect to a tee for regulated feed to the Wave 3. thanks.1.5KViews0likes3Comments
Groups
Fifth Wheel Group
Interested in fifth wheels? You've come to the right spot.Jan 13, 202519,006 Posts Motorhome Group
Join in here to discuss all things motorhomes.Jan 21, 202538,705 Posts Travel Trailer Group
Prefer to camp in a travel trailer? You're not alone.Jan 20, 202544,030 Posts
