All ActivityMost RecentMost LikesSolutionsRe: bedroom slidout problemsI tried that all those will do is angle the slideout where the top closer earlier or later it wont raise the slide at the wall.bedroom slidout problemswe have an 08 four winds siesta, the bedroom slide is sitting low, the bottom of the slide is smashing the wiper seal it is about a 1/2 inch from the frame of the wall the top of the slide doesnt hardly touch the top wiper seal. it needs to be adjusted up evenly on the wall side but there isnt adjustments there it is screwed directly into the wall and there are plastic bushings the slide rides on? any suggestions this is a link to the type of slide http://lci1.com/images/support/complist/X-9ElectricBedSlideSystemAssembly.pdfadding a generatorMy fleetwood jamboree had factory option of a generator but wasnt installed the wiring is in the storage compartment to the hood vent but nothing else. can someone give me some information of a kit or all the information for installing one. i dont know where any air or exhuast or bracing would be put in. thanks