All ActivityMost RecentMost LikesSolutionsRe: Windshield replacementIt seems that posting to this forum have helped. Got a call today that the windshield will be ordered and available in a week. Just for reference, the cost is CAD 2,450+tx (USD1,800) Thanks for all the answers!Re: Windshield replacementI checked on the windshield this morning and this is what is shown on both sides (Passenger and driver): VIRACON Laminated AS1 M-103 DOT 129 414 I have no clue why this is not enough for Go Glass to source the windshield.Windshield replacementI bought a used 2005 Trail-lite class A motorhome few years ago. The decal on the side of the coach shows Holiday Rambler but all the documents I have tell R-Vision model 321. The windshield on the driver side needs to be changed as a crack developed from a rock chip which may not have been fixed properly by the previous owner. The crack is now one foot long. The vehicle has been with Go Glass for a month now and I got a call from the company telling me that they do not find the windshield reference (They have the VIN). They called Holiday Rambler and got several references and do not know which one to order and ship to Canada. I also emailed coachglass.com as they mention on their page that they have windshield for R-Vision Trail-Lite. I do not live very far from the US board and can drive to have the windshield fixed (once the border open). However, I did not get any answer from them either. So I was expecting the members of this forum to provide some feedback how to find a windshield reference for this motorhome model.Another not square slide-outI bought a used 2005 Holiday Rambler Trail-Lite Class A. This does not seem to be a common model as the information on line is parse and the user manual I got is from R-vision. The largest slide (dinette and couch) is not square (picture below). The bottom and top of the slide are aligned and parallel to the coach but the right and level side are not. The electric motors (power-gear) work very hard and almost stall when moving the slide in and out as the top left side and bottom right scrap the coach. I used my square set and the ceiling and wall are definitely not square on both sides. I tried to lower the right side but it does not go down any more as the floor of the slide is already flushed with the floor of the coach. I have inspected the inside and outside of the slide and have not seen any sign of damage related to the shape of the slide. it seems to me that there is no adjustment for this problem as the slide is already centered and aligned. Does anybody have any idea how to fix that? ***Link Removed***