All ActivityMost RecentMost LikesSolutionsRe: Onan generator wont startToday I changed the starter solenoid and no help, still the same problemRe: Onan generator wont startIt sounds like the problem could be either the starter solenoid or the starter itself, I hope is the starter solenoid, since if it is the starter I would have to take the generator down in order to replace it. I was thinking of making a hole in the metal cover to be able to access the starter and not taking the generator down. Have anybody done that????Re: Onan generator wont startjluke how can I test it and make sure it is the starter selonoidRe: Onan generator wont startI also cleaned all contactsRe: Onan generator wont startand just changed the oilRe: Onan generator wont startThe gas tank is half fullRe: MicrowaveThank you, I purchased a new microwave since the plate was not turning anymore, I also replaced the fuse breaker, and will remember the advice to turn off the AC if it happens again. Thank you very much for all the helpRe: Onan 4000 Microquiet not startinghow did you get to the flywheel, did you have to remove the generator from the motor homeOnan generator wont startI am having problems starting my Onan generator it is a Emerald 4000 model 4BGEFA26101K The problem is the following: When I press the Start button the engine does not crank instead I hear a winding sound and it never starts. I will appreciate very much any help.Re: MicrowaveSorry does not blow a fuse, it blows a circuit breaker