Needed a new step motor, the original motor has part number 300-1406 and is well over $100 bucks. After doing some research I found that a 1995 Ford 150 (and other Ford models) window motor is the same part. #83094 and I paid $30.99 at a local auto p...
I have been doing maintenance on our new to us coach. The aquahot system was next. The burner was quite dirty, sprayed it with carb cleaner and put it in the parts washer, after 15-20 minutes it wasn't much different if at all so I used great value o...
We just recently purchased a 09' Monaco Camelot and the left taillight has moisture inside so I did a search for a new one. Prices for that search was $84.00 and up for a Monaco but I discovered that it is from a Jeep Grand Cherokee 1993 thru 1998 an...
Update: I used JB weld on top of the "detent button" to make it a tad taller. I had to sand it down a bit to get the right amount of resistance, then some white grease. Will see how long the JB weld lasts
Different M/H than yours and I accessed the bulb from the rear, in side the rear engine hood. The socket turns 1/4 turn to unlock the socket from the tail lens. Hope this helps, Bill
Executive wrote:While the nozzle change etc. is pretty easy and most any DIY can do it, be sure to check the fuel pressure as well. I don't have the means to do that so I leave that service to my technician....DennisDennis, how is that RVI charger wo...
