AikenRacer2
Explorer
Joined 4 years ago
User Profile
User Widgets
All Activity
HAZY windows in South Caroline
I need to have numerous windows repaired in our 2012 Thor mh. Insulated windows have hazed up. I know about Suncoast in Florida but wanted to see if there is a good repair shop closer to home. I live in Aiken, South Carolina between Augusta, GA and Columbia, SC. Any suggestions? Thanks!!1KViews0likes5CommentsLP gas leak
2012 Thor Tuscany 42' motorhome. Long story short, the tank level gauge that is screwed into the side of the tank is leaking around the threads when I had the tank filled. I tried to tighten but did no good. Seems like I need to empty the tank to repair. Tank now used down to about half. The leak is barely enough now to bubble the soap solution. So my plan is to empty the tank fully, unscrew the gauge, retape the threads, etc. I want to pressure check with air before putting in gas. I would also like to replace the fill and vent hoses with the system empty. Hoses look good but they are 11 years old. I am open for ideas on this situation. Not real sure how to get the tank 100% empty.1.5KViews0likes5CommentsRe: Bad Lippert O ring
Never got a response from Lippert or any of the on line companies that makes custom o rings. Probably not interested in making one o ring. I did resolve the problem. I added a small washer to each of the 4 hold down bolts. This gave me more compression on the o ring. I think the bolts were bottoming out on the pump. Anyway, I now have it fixed with no help from Lippert!641Views0likes0CommentsBad Lippert O ring
I have had a small hydraulic leak from the pump system for a while. I finally narrowed it down to the o-ring between the plastic tank and the pump itself. It's a 3.5" o-ring. Looks like whoever installed it did not get the o-ring in level all the way around as it had a twist in it. Ok, I'll just get a new o-ring from Lippert and replace it. Well, much to my surprise, Lippert will not sell replacement o-rings. What a crappy way to treat a customer who spends mucho money on their products. I could probably rotate the o-ring to the top so that it's above the fluid level but I'd rather fix it right. Other than Amazon, where could I get a replacement O-ring that has a flat surface? Lippert stinks!3.7KViews0likes13CommentsAir bags slow to inflate
I have a 2012 Thor Tuscany 42' tag axle. Have had it since new. It seems like it is taking longer for the air bags to inflate that it use to after the air pressures are up. This past week end when leaving the campsite, they did not inflate until I lowered the jacks again and raised them back up. The two air pressure gauges on the dash rise to normal pressures but the motorhome just does not rise like it use to. Not real sure where to start trouble shooting. Any suggestions?1.5KViews0likes4Comments
Groups
Motorhome Group
Join in here to discuss all things motorhomes.Mar 09, 202538,709 Posts
