All ActivityMost RecentMost LikesSolutionsRe: 2004 GS Endura Power Cable From Gen to BatteryI forgot to mentioned that I had already checked both ends of the wire at the gen and battery and they are clean and tight. I had also checked the ground wire connection from the gen to MH frame. What you guys are referring to as the 12V switch is what my dealer calls the battery disconnect switch? Mine is located below and to the left of the oven on the kitchen cabinet wall(built in 2003). I don't if my unit has the high amp circuit breaker in the compartment with the hydraulic pump? I will check for it. I have four breakers in the first compartment back from the driver's door and I checked them. Thanks for all the replies, Carl2004 GS Endura Power Cable From Gen to BatteryDoes anyone know where Gulfstream ran the power cable from the Generator to the battery on a 2004 GS Endura, Model 6340. The generator wouldn't start, so I took the MH to an Authorized Onan shop. They hooked it to Jump Pack. It started and ran fine. The battery and transfer switch were checked next and they both checked out OK. They said the power cable from the gen to battery had to be the problem? Does anyone know if GS ran this cable inside or underneath the MH? Single or in a bundle of other wires? If bundled how do you identify, which one is the generator cable? Thanks for any help, Carl