Ford's answers to the NHTSA 6.7 Investigation
There was a request for a link to Ford's answer's to the NHTSA investigation posted on a previous thread, since closed. Here is the link: Ford's NHTSA Answers to the 6.7 investigation This PDF i...
Forum Discussion
NinerBikes wrote:
For the life of me, Bosch has had facilities all over the US that could rebuild and re manufacture diesel fuel pumps and injectors. I'd think for certain any Bosch center that can remanufacture a CP 3 ought to have some knowledge about the CP4 series of pumps, parts, spares, spare rollers, followers, one over pistons, etc as well as machining features to clean up the bore for a new piston?
Unfortunately, I no longer have said piston, or roller or the whole HPFP... no sample to take in to get reverse engineered. I think Ricatic has 2 pistons and 2 followers currently? Hit him up.
ricks pump is dead --- too destroyed to yield evidence.
I am not so sure about the Bosch reman facilities.
The technology is kept very close to their lederhosen, and for as business / trade secret a process as DLC coating, there is zero chance they will let the process outside of the fatherland or let any outworlder get close to it.
Based on what I know about those reman facilities, they only inspect and repair non-critical components, or install factory replacement parts but not do the real stuff.
Even then, we are talking about auto grade clean room facilities, and fairly skilled staff.
Ask yourself: the best reverse engineers have worked on their pumps, and so far, there is not a single Chinese, Russian, Indian, Taiwanese, and S. Korean clone.
Why not?
