Add a remote switch for an inverter?
I have a couple of pure sine wave inverters. They are bargain inverters; however, I find them to work well enough and they satisfy my needs. But I really wish I had a remote on/off switch for them. ...
Forum Discussion
only way to add a remote switch:
A) Your inverter supports it, just plug in the required switch
B) open your inverter and solder wires in parallel to the existing switch, run them wherever to your new switch. use a multimeter and make sure the switch is on the low-voltage side and not the high voltage side (have a Radio Shack inverter that is always-on but has a switch for the outlet)
A) Your inverter supports it, just plug in the required switch
B) open your inverter and solder wires in parallel to the existing switch, run them wherever to your new switch. use a multimeter and make sure the switch is on the low-voltage side and not the high voltage side (have a Radio Shack inverter that is always-on but has a switch for the outlet)
