Add a remote switch for an inverter?
I have a couple of pure sine wave inverters. They are bargain inverters; however, I find them to work well enough and they satisfy my needs. But I really wish I had a remote on/off switch for them. ...
Forum Discussion
mkirsch wrote:
You're worried about the parasitic draw of a control module for a wireless remote, but you don't seem to be at all concerned about the parasitic draw of the inverters when powered off?
In either case the draw is "minimal" but there is still a draw.
Check your individual inverters. This statement is not universally true. When my inverter is switched off either by the switch on the inverter or the remote switch there is zero draw by the inverter even though it remains hard wired to the 12-volt supply.
