Almost done with the new sink install
Been working feverishly trying to get my new stainless steel sink and single lever Moen fixture installed. I installed a Doulton dual candle water filter and a little faucet along with the sink and f...
Forum Discussion
myredracer wrote:Vintage465 wrote:
I had this little faucet in my stash to use with the new Dualton Filter. Not sure I'm happy with it. It drips now and then.
Nice job. DW will love using it... :)
Should not drip and you don't want it to get worse over time. Is it a cheap one or better quality one? I installed a non-air gap RO faucet at our kitchen sink and bought a good one with a ceramic cartridge and it works fine. Can't remember the brand. I also installed a Doulton ceramic filter and then I also installed an ultrafiltration filter (0.2 micron). I used 10" whole house cartridges for ours and put them right under the sink.
Our TT came with an under-mount stainless steel sink and pull-down faucet. We almost never use the pull-down feature. The weight on the flex line has not been a problem.
The little faucet was one that had ordered for my bathrooms Reverse Osmosis system in my house. When I got it, it wouldn't extend far enough through the counter(tile) to get the nut on to hold it down let alone the tubing and fittings. So it was in my stash. $15.00 if I remember right. It will likely irritate me enough that I will eventually find a better one and put it in.
