Another septic hose support system
Used 3/4 PVC which was more than strong enough. I cut up some rain gutter to various lengths to go with the stands. They come apart for easy storage. Parts for a little over $10 ...
Forum Discussion
Did the same thing a few years ago after my expandable support system started to fall apart. I used 1/2" pvc pipe which is more then strong enough. Glued everything together except the straight pieces for the uprights. Then cut a lot of pvc pipe in 1" increments(from 2-8 inches) for the uprights to hold my gutter so I can slowly taper it down to the sewer connection. So much better then the slinky I had. Cost was about 10 bucks also.
