anyone extend the height of their bed lift?
My bed lifts are 21" (the standard I think) and work. The problem is that I need to stoop and bend to get under the supported mattress. Has anyone installed longer lifts on the bed for easier acces...
Forum Discussion
Perhaps this may help? Hatchlift kit
You *can* relocate the strut mounting points closer to the hinges but there may not be enough force to keep the bed in the raised position. There are other spring rates available though if your existing ones aren't quite enough. I think you would need to set up new strut mounting points and strut lengths so you don't end up with one end in the pass-through storage space.
Lots of online sources for the lift struts such as:
RVPartscountry
You *can* relocate the strut mounting points closer to the hinges but there may not be enough force to keep the bed in the raised position. There are other spring rates available though if your existing ones aren't quite enough. I think you would need to set up new strut mounting points and strut lengths so you don't end up with one end in the pass-through storage space.
Lots of online sources for the lift struts such as:
RVPartscountry
