Exterior seam molding source needed
Hi everyone, I'm new to the forum, and I'm at work at the moment, so I have to keep it brief, lol. So I doing a conversion on a transit bus and have had to completely strip off the exterior (bad rus...
Forum Discussion
The best I can suggest is checking out the PVC moldings at a big box store. I've seen some variations on panel joints and T moldings and such, I think. You might also have success applying eternabond tape over the seams once you've completely finished the plywood, though I think it would look rather poor.
On the whole, this scheme of covering sounds somewhat problematic to me, for what it's worth. Typical current practice is to have a seamless sheet of flexible filon or similar (a sort of fiberglass laminate, I think) over whatever substrate is used, or else interlocking corrugated aluminum siding strips. Maybe I just lack some sense of adventure or don't have enough faith in unconventional approaches.
On the whole, this scheme of covering sounds somewhat problematic to me, for what it's worth. Typical current practice is to have a seamless sheet of flexible filon or similar (a sort of fiberglass laminate, I think) over whatever substrate is used, or else interlocking corrugated aluminum siding strips. Maybe I just lack some sense of adventure or don't have enough faith in unconventional approaches.
