Forum Discussion
Old-Biscuit
Aug 24, 2014Explorer III
I carry 2 -----6X6X12 blocks with rope handle for rear stabilizers
I carry 2 -----2X10 boards for leveling side to side
One board is the width of truck bed......other one is 4" shorter and angle cut on ends.
I carry them across bed of truck towards rear.
That is all I've needed in 7 yrs. of FT travel.
If 2 boards under wheels is not enough,,,,,,,,,then I move.
Position rig.....lay board down......back onto it......done.
No pulling leggo blocks out, no stacking, no building of little ramps, no plastic block slipping.
And I can still set wheel chocks on the wood boards.
I carry 2 -----2X10 boards for leveling side to side
One board is the width of truck bed......other one is 4" shorter and angle cut on ends.
I carry them across bed of truck towards rear.
That is all I've needed in 7 yrs. of FT travel.
If 2 boards under wheels is not enough,,,,,,,,,then I move.
Position rig.....lay board down......back onto it......done.
No pulling leggo blocks out, no stacking, no building of little ramps, no plastic block slipping.
And I can still set wheel chocks on the wood boards.
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,397 PostsLatest Activity: Dec 04, 2025