Mounting pedestal chairs in slide
I want to remove the sofabed in our Suncruiser 35U and replace it with 2 Flexsteel barrel chairs that are on pedestals same as drivers chair. Any ideas on how to mount them? Know I can't go thru floor...
Forum Discussion
You would need to add some Steel plates below the Floor and run carriage Bolts UP through the plates and through matching holes in the Pedistal .
This could be accomplished with the Slide Extended on My Rig! As long as the Plate and Bolt Heads were kept to the minimum and don't interfere with the Slide mechanism it should be a piece do Cake.
Driving Lag Bolts in from the Top would not work for Me. Just not enough solid wood to get a secure grip!
You would also need to determine if Seat Belts could be added!
This could be accomplished with the Slide Extended on My Rig! As long as the Plate and Bolt Heads were kept to the minimum and don't interfere with the Slide mechanism it should be a piece do Cake.
Driving Lag Bolts in from the Top would not work for Me. Just not enough solid wood to get a secure grip!
You would also need to determine if Seat Belts could be added!
