Forum Discussion
MSHappyCampers
Sep 20, 2011Explorer
lar5camping wrote:
Yup, that's an option. I did the same, bought the ratcheting
bars, but, I don't have them permanently attached. And I don't
put them on the bottom of the front landing gear. It will move
the landing gear. I place my landing gear on 10x10 inch blocks.
Drive a large tent stake on the outer side of the 10x10 blocks to
keep them from moving and place one end of the bar on the top
of the front landing gear and the other end on the bottom of the
opposite block. No movement. Can't be beat!
For the rear scissor jacks, I use angle iron, top on one side,
to the bottom of the other side and clamp with C-clamps. Just
as steady as the 1000's of buckazoids pro jobbers, for real cheap!
I can't imagine the bars moving a landing leg with thousands of pounds weight on it! Also, what do you do when you're on a concrete slab? I think it would be easier just to spend a couple of hours installing them permanently. To each his own...:B
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,351 PostsLatest Activity: Jan 13, 2025