This is how I will transport my Honey Wagon
Here is another PVC Pipe project I recently completed. 1" PVC pipe was used to fabricate the support that will carry the big blue Tote. A small pulley was placed at the top of the ladder to lift an...
Forum Discussion
midnightsadie wrote:
looks good, but the first officer who,s had a bad day is not going to like the blocking of the tail light.
Maybe.....think he would also have a problem with the OEM installed ladder rail in front of it?
Be careful with that model of Barker tote. Look at how the axle is attached. It is pressfit into a slot and held with 4 tabs molded into the edge of the slot.
The axle has been know to pop out of the slot , not when hauling the honey but when hauling the empty tote due to bumps in the road. Ours has popped out a bunch of times when its bungeed to a flat equipment platform.
