This is how I will transport my Honey Wagon
Here is another PVC Pipe project I recently completed. 1" PVC pipe was used to fabricate the support that will carry the big blue Tote. A small pulley was placed at the top of the ladder to lift an...
Forum Discussion
Lantley wrote:
Good Idea but there is no need to fabricate a rack. It has already been done for you.
I carried my tote for years using a chair carrier/rack.
Any problems w/ the ladder pulling away from the back wall or sealing material cracking? I bought one of these to do the same thing, but then read a few posts where people were worried about that sort of thing.
