Forum Discussion
C_Schomer
Mar 03, 2013Explorer
I tried deleting my grill reg and putting 11" to the orifice and it barely had enough flame to get warm. I wanted to avoid getting into the high tank pressure and to make the story short... I found that I needed at least 15 psi to the grill reg so I teed in between the 1st and 2nd stage regs (my old Marshall is built so I can do that) and I had ~18 psi there. That was enough to get high fire with the grill reg/control installed and the supply always comes from the in-service tank. Craig
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,351 PostsLatest Activity: Jan 18, 2025