Xantrex 3012 and AGS install
Hi, I just finished up an install of a new Xantrex 3012 and AGS to replace an old inverter that stopped working. The only issue I ran into was connecting the AGS to the correct wires, and finding t...
Forum Discussion
It would help if you did not use acronyms for things, and explain what a AGM is.
You might want to contact Xantrex or your selling dealer.
if you are trying to figure out what colors went to the old inverter to start the generator, I can only hope that you wrote down the colors for each terminal when you disconnected. Then it might be possible to find the old owners manual for the old inverter, and figure out that the terminals 1, 2, 3, 4 are the same as required to start stop and keep the generator running with your new control panel. Then figure out what color went to 1, 2, 3, and you have it made.
Good luck!
Fred.
You might want to contact Xantrex or your selling dealer.
if you are trying to figure out what colors went to the old inverter to start the generator, I can only hope that you wrote down the colors for each terminal when you disconnected. Then it might be possible to find the old owners manual for the old inverter, and figure out that the terminals 1, 2, 3, 4 are the same as required to start stop and keep the generator running with your new control panel. Then figure out what color went to 1, 2, 3, and you have it made.
Good luck!
Fred.
