Auto Leveling

Lantley wrote:

JKJavelin wrote:
I would constantly get out of stroke errors on one of my rear levelers. Out of stroke means it's drawing too many amps and tripping that error code. It thinks it's out of stroke because it's binding for some reason. Mine eventually failed and was replaced under warranty. It's been perfect ever since.
JK

Out of stroke means leg has traveled/extended as far as it can but RV has not reach level position.
Once the leg has extended as far as it can, the system shuts down because it cannot raise the RV any further.
THe leg is "out of Stroke" or out of extension.

JKJavelin wrote:
I would constantly get out of stroke errors on one of my rear levelers. Out of stroke means it's drawing too many amps and tripping that error code. It thinks it's out of stroke because it's binding for some reason. Mine eventually failed and was replaced under warranty. It's been perfect ever since.
JK

laknox wrote:

GHop wrote:

laknox wrote:

GHop wrote:



I have been good at reading and following the instructions but our leveling system has only worked correctly one time. Most of the time it has an error "Out of Strock". I would love to use it but no joy. I'm happy your is working correctly

Geez, if it's out of stroke, then put some blocks under the jacks that are limiting out! If you're already doing this, then put more blocks. If it's still showing an error when you're close to level, then you've got a system problem and need to address it. A trip to the dealer for a refresher lesson might not hurt, either, just to be sure.

Lyle

Thank you for the information, but the blocks did not work. Okay, happy travels.

Sorry for coming across a bit chippy. Fighting a cold... :-( I'd say that the system needs a re-zero. Once that's done, give it a try and if you're still getting errors, then a trip to the dealer would be in order.

Lyle

GHop wrote:

laknox wrote:

GHop wrote:



I have been good at reading and following the instructions but our leveling system has only worked correctly one time. Most of the time it has an error "Out of Strock". I would love to use it but no joy. I'm happy your is working correctly

Geez, if it's out of stroke, then put some blocks under the jacks that are limiting out! If you're already doing this, then put more blocks. If it's still showing an error when you're close to level, then you've got a system problem and need to address it. A trip to the dealer for a refresher lesson might not hurt, either, just to be sure.

Lyle

Thank you for the information, but the blocks did not work. Okay, happy travels.

laknox wrote:

GHop wrote:



I have been good at reading and following the instructions but our leveling system has only worked correctly one time. Most of the time it has an error "Out of Strock". I would love to use it but no joy. I'm happy your is working correctly

Geez, if it's out of stroke, then put some blocks under the jacks that are limiting out! If you're already doing this, then put more blocks. If it's still showing an error when you're close to level, then you've got a system problem and need to address it. A trip to the dealer for a refresher lesson might not hurt, either, just to be sure.

Lyle

GHop wrote:



I have been good at reading and following the instructions but our leveling system has only worked correctly one time. Most of the time it has an error "Out of Strock". I would love to use it but no joy. I'm happy your is working correctly

dapperdan wrote:
"I have been good at reading and following the instructions but our leveling system has only worked correctly one time. Most of the time it has an error "Out of Strock". I would love to use it but no joy. I'm happy your is working correctly "

G Hop, When you get the "out of stroke" message all you need to do is look at which ram(s) is/are extended all the way, bring up the rear jacks, place a block or two under that ram(s) and hit "auto level" again and let it do it's thing. I don't think there's anything wrong with your leveling system. We will on occasion get that message if we're on a very "un-level" site and I haven't placed any blocking under my jacks.

Our level-up system works GREAT, I think yours will too.

Thank you guys for the help. Heading out next week so I'll give it a try. Again, thank you.

Dan