Bedroom slide bind
I have an issue with our bed slide with the Bal-Accu system installed. Problem is that the top left and bottom right corners are in a bind and have destroyed the wipes. On inspection, I have found tha...
Forum Discussion
dougrainer wrote:
I have worked on and FIXED Dozens of Accu Slide systems. And YES, I have no idea what you are talking about:B Download this link and watch the various video's and see if that does not help you. Doug
https://balrvproducts.com/products/oem/accuslide/index.shtml
Hey Doug.
I bought three lengths of aluminum for the roller plates and I was going to shim the center one up by a 1/8" then on the other one by a 1/4"so as to create a run on the sill this was just to take the corners away from the studs, so as not to shear the wipes. The rough out does appear to be out of square by at least 7/16"/ 1/2".Jacking up the low end does take the floor away from the internal wipe don't like that idea.
Your thoughts please being you worked on these Accu-slides.
Den.
