Coleman Air not working.

Question

My '03 Jayco Designer Legacy has a Coleman Mach air conditioner in the front location. Manual control, no thermostat. It worked fine on Monday, no issues. When I attempted to turn it on yesterday, it was completely dead, no fan, nothing. I checked the breaker and the pedestal, no problems. I dropped the inside shroud and measured 98 volts at the connection. I then went to an outlet and measured 120 volts. What am I missing? Even if there is only 98 volts at the unit, shouldn't the blower at least operate?
Thanks,
RTer

donn0128 · Answer

Does the fan turn?  Couple of years ago I discovered my fan locked.  Spun it by hand a few times and some wd40 and it has worked fine since.

scrubjaysnest · Answer

With that low voltage may need a hard start kit.

midnightsadie · Answer

question with power off measure volts at the ac connection,if thats 98? whered you loose 22volts? don,t think you have enough volts to turn on the unit.

laknox · Answer

midnightsadie wrote:question with power off measure volts at the ac connection,if thats 98? whered you loose 22volts? don,t think you have enough volts to turn on the unit.x2!  Find out where that juice is going!Lyle

ksg5000 · Answer

Dead quiet or do you hear the hum when you turn the switch?

Forum Discussion

Coleman Air not working.

About Fifth Wheel Group

Related Content

Dash air not working

Air horn not working

Coleman Airxcel

Do Performance Air Filters Actually Work?

Coleman-Mach Mach 3 Plus air conditioner Question