Forum Discussion
Old-Biscuit
May 26, 2014Explorer III
Slide outs are self supporting with MAX weight load when FULLY EXTENDED
Flush floor slide outs (those that tilt up when retracting/drop down flush to floor when extended) have minimal weight load support when retracted and/or when in motion.
Floors are typically 1" plywood but that subfloor is only fully supported when extended
Probably support 900# bike when extended but the floor would probably sag when slideout is in transition & retracted position for travel.
Plus bike would be tilted towards outside........not so stable
Might be better off with a Toy Hauler and remodel it to your liking
Flush floor slide outs (those that tilt up when retracting/drop down flush to floor when extended) have minimal weight load support when retracted and/or when in motion.
Floors are typically 1" plywood but that subfloor is only fully supported when extended
Probably support 900# bike when extended but the floor would probably sag when slideout is in transition & retracted position for travel.
Plus bike would be tilted towards outside........not so stable
Might be better off with a Toy Hauler and remodel it to your liking
About Fifth Wheel Group
19,033 PostsLatest Activity: Jan 20, 2026