Fresh tank leak

You might try to have that "cold" welded first and see if that works. I don't know if the exact term is "cold welded" or not, but it will give you an idea.

And forgive my ignorance. What is a WW FB2100 ?

WoodGlue

Those pictures look like waste water tank instead of fresh water

Try www.elmonteplastics.com

WoodGlue wrote:
You might try to have that "cold" welded first and see if that works. I don't know if the exact term is "cold welded" or not, but it will give you an idea.

And forgive my ignorance. What is a WW FB2100 ?

WoodGlue

WW = Weekend Warrior. I had my front cap fixed like that, I didn't think about trying that on the fresh water tank, but I will look into it. Thnx.

DUNEBUGGYDOUG wrote:
Those pictures look like waste water tank instead of fresh water

No wonder my water tasted so bad! It's my fresh tank, I promise.

Camorhino wrote:
Try www.elmonteplastics.com

I will call them Monday. Thnx.

That is not a fresh water tank, it is a waste tank. It should be the holding tank for the shower or kitchen. That is a waste dump valve dropping down from the Tee. Looks like something hit the drain line and tore the plumbing from the tank.

If your using this as a fresh water tank someone has screwed up your plumbing in a BAD way.

Peg Leg wrote:
That is not a fresh water tank, it is a waste tank. It should be the holding tank for the shower or kitchen. That is a waste dump valve dropping down from the Tee. Looks like something hit the drain line and tore the plumbing from the tank.

If your using this as a fresh water tank someone has screwed up your plumbing in a BAD way.

I agree that this looks like a grey water tank with the black water line tying in from the rear of the photo. All of the fresh water tanks that I have had are see through tanks and had no ABS piping on them. JMO

It is a fresh tank. There are 2 fresh tanks side by side with a gate valve in between, so I can isolate 1 tank from the other. The valve you see in the picture is to empty both fresh tanks. Also, the fresh water line (blue pex) comes out of the bottom of the tank that is leaking, and that line is just outside the top picture. My gray and black tanks are closer to the front of the trailer. The gate valve in this picture is on the passenger side right by the front door. My waste valves are on the drivers side.

Yep, just like it was on my WW CL 4005......