Hot water heater
Made a mistake today, turned on hot water heater with no water in it. Now it’s not working. Help please.
Forum Discussion
With Suburban water heaters an additional inside on/off switch for electric by installing another one in 'series' with outside OEM one
Run AC wire from circuit breaker to new switch then out from new switch and tie in with OEM wire to outside switch
Easily done close by backside of water heater where the AC Junction box is located.
As for that Hot Water Heater
Define HOT
After initial fill/heating cycle the water is still HOT when reheating cycle occurs.
Run AC wire from circuit breaker to new switch then out from new switch and tie in with OEM wire to outside switch
Easily done close by backside of water heater where the AC Junction box is located.
As for that Hot Water Heater
Define HOT
After initial fill/heating cycle the water is still HOT when reheating cycle occurs.
