Moving sewer hose from tub to tube
I am now storing our sewer hose and fittings in a large rectangular tub with a lid in the belly compartment. The tub seals pretty well so there is no odor but would like to move the hose under the t...
Forum Discussion
rhagfo wrote:
Well I was able to get mine done today! Thanks GoDucks10, I place mine in the back for now, as I need to make some good spacers off the frame so it will clear the gas line, OR move the gas line up into the frame.
I really like the idea that ALL the stinky stuff goes in the tube, stinky slinky (both lengths), the clear 45 degree elbow, and the 90 degree at the site.
Simple latch, dug out the pop rivet tool for this project.
Hey Russ,
Looks like you modified the post cap to fit using the hinges? Is that correct? If so, would you have a better pic of how you modded the cap?
I have already bought a fence post. We are going on a short trip down south New Years and thought I might get this done while we are gone. To cotton picking cold here to do it! Thanks, John
