Need help- Leak at fresh water tank
Hello all, I am in need of some help. I have an 07 attitude 26FSAK. The fresh water tank is leaking from the fitting going into the water pump. The fitting is (i think) a 1" female bung that is glued ...
Forum Discussion
Dirtclods wrote:
OK call these people 714 259-1385 as mention above (Spin welding is the process) 07 Attitude 19" fresh water tank issue they took care of it. Pull your tank it tanks like 45 minutes, drive it over it well cost like maybe $30 bucks headache gone! Don't waste you time trying to glue it, they don't hold with everything flexing I tried it a waste of time!! http://www.ronco-plastics.net/
Just wanted to follow up with what has been done. I listened to dirtclods advice and pulled the tank. It took me about 45 minute ( just like dirtclods said ) and drove it down to ronco. They are open every other saturday. They replace 3 of the fittings because they were cracked and the total cost was $40. Now I have to put it back in. Thanks dirtclods for the solid advice!!
