Percent of Pin Weight on Each Axle
We will be switching from a TT to a Fifth Wheel sometime in the not too distant future, so meanwhile I am doing my due diligence. My question is a technical one. If the fifth wheel hitch is inst...
Forum Discussion
Back when I started towing 5th wheels in the stone age, a rail-mounted Reese was the 5th wheel hitch of choice. Their installation literature called for the kingpin bore centerline to be 2" to 4" ahead of the rear axle centerline. Most hitches are within a few inches of that today. Our B&W Companion falls into that range, I suspect from my calibrated eyeball measurement.
Rusty
Rusty
