Power cord connections melting
I have been having problems with my connections getting hot and melting the plastic plugs. This mostly happens at my 50 amp to 30 amp pigtail going into the camper. I have replace the power cord con...
Forum Discussion
pianotuna wrote:
It is true that because RV's are plug in devices that the above figures which are from the electrical code are not enforced.
Doug asked you for "a reference". "from the electrical code", it is a vague comment that purports to be a reference. Here in USA we use the NEC to spec wire sizes, etc. In Canada, you use CEC to do the same. No where in the NEC does it say anything like what you stated about requiring reduction of amps to preserve a plug, etc. I would like to see the section of the CEC where they do. Please post that specific section of CEC so we can all gain knowledge.
