Power issue
I had to replace a bad pigtail on my Keystone Challenger. My issue is I have no shore power afterwards. I and several other ppl have tested voltage. Power at pedestal, power at breaker , and even sho...
Forum Discussion
Whitley1981 wrote:
Ok let me explain its 120v like supposed to be I have power to everything including outlets but nothing works including anything I plug into the outlets. 110v to circuit board, to the breakers, to the outlets, everywhere but nothing works. Outlets show power but nothing plugged in works. Fridge/micro show power at circuit but nothing works. The only power I have is from 12v. Fridge works off the lp. Just fine. I can't understand why it's shows I have voltage at every point from the shore hookup all the way to each and every outlet by nothing gets power.
Did you read my post?
A fried GFCI can show voltage at the receptacles but have no current carrying ability.
You should also do as Time2Roll said and plug in something simple to test the outlets.
