Pulled the trigger,2105 Ram crew 3500,hitch install question

I installed mine with no problem.

CumminsDriver wrote:

Cummins12V98 wrote:

jsrore wrote:
cummins12V98

thanks for the info...will start doing some research

You are welcome! I assume you have the indents in your bed already?

Isn't the goosneck crossmember already in place even without the factory hitch prep?

Rich

I do not think so! Chris

oops bad night i meant this video.
https://www.youtube.com/watch?v=WQ84NdxKEo8

actually just found the ram part number.
prep kit 82213665ab.

or the b and w
https://www.youtube.com/watch?v=oUr-nQuPEnE
not sure if link will work first time trying.

you can buy the 4 corner fifth wheel hitch mounts from ram( i did this to my new ram). then you can use a pull rite, b and w, curtis or who ever offers a factory mount hitch.
or, you could get a b and w upside down ball mount and use a companion setup. This is a very clean setup as well.
looking back i wish i went with that setup. you can move it very far back for more space in front of the bed for a fuel tank.
if you need the ram part numbers i can see if i can find them or go to the ram main page and contact customer support and they will give you the numbers.
bobby
if you want to see my setup pm me with your email and i will send you pictures.

CumminsDriver wrote:

Cummins12V98 wrote:

jsrore wrote:
cummins12V98

thanks for the info...will start doing some research

You are welcome! I assume you have the indents in your bed already?

Isn't the goosneck crossmember already in place even without the factory hitch prep?

Rich

If you look at the frame underneath the bed of the truck, you'll see what they're talking about as far as mounting a ball for a GN hitch or turnover ball for B&W type 5er hitch

if your talking about the indents in the bed...then yes

Cummins12V98 wrote:

jsrore wrote:
cummins12V98

thanks for the info...will start doing some research

You are welcome! I assume you have the indents in your bed already?

Isn't the goosneck crossmember already in place even without the factory hitch prep?

Rich

jsrore wrote:
cummins12V98

thanks for the info...will start doing some research

You are welcome! I assume you have the indents in your bed already?

NC Hauler wrote:

Me Again wrote:

NC Hauler wrote:
deleted...wasn't pertinent to the thread.

Ron said you are best buds now!:):)

He got us a good deal on the B&W Companion OEM RVK3600 5er hitch...kinda cool, I ordered one and so did he...so to be, what, 3800 miles or further apart or so ..yeah, we pretty good bud's...just like you and me Chris:)

Chris is West of me when at home but he is closer to you now. So I think that makes him more better "bud" at least for a while.