railing for steps inside 5th wheel
hello all , am looking to install a non weight bearing railing in our 2013 Copper Canyon 269 FW . this is for balance only .this is to come down steps from the bed and bath area. wife has fallen dow...
Forum Discussion
Ok. These are my thoughts on the subject. If I was to install a hand rail on a non- bearing wall, I would of course look on the other side of the wall to see if I can go through for adequate support. If that wasn't possible, I may look at supporting the rail from the floor. Maybe a 1/2" material along wall, supported on floor and able to support the rail. BTW, the rail needs to be weight bearing. That's what it's for.
