sssooo
Apr 16, 2022Explorer
Steps
I just stopped for the nite and my steps won’t come out I checks the plug it’s ok
I have a 2018 Fleetwood Bounder 36”
I have a 2018 Fleetwood Bounder 36”
sssooo wrote:
:SIf this works how do I get the steps back in?
sssooo wrote:
My mistake I do have power to the red and white wire I put a new clip on my test lite works better
Now my back hurts!
enblethen wrote:
Here is a diagram for most Kwikee steps. They have over the years switched the magnetic switch from normally open to normally closed, wait was it normally closed to normally open.
Kwikee step diagram
Yes the switch does provide a ground to the controller but it is not a good ground for testing. If you had a multimeter it would be used to verify switch operation. If your test light has a continuity operation, it could be used for checking switch.
Best ground for testing would be one to frame. You could take the motor ground, large green wire, loose from the frame, clean the frame good, reattach and use it for testing and ground for motor.