Leveling Pickup bed to the hitch rails
Anyone find a pad or something to put it the pickup bed to build it up so it is closer to level with the hitch mounting rails? The trails are almost an inch high. The pickup bed mats I saw are @ 3/8 o...
Forum Discussion
I used 3/4” plywood cut to fit around the rails and the contour of the bed. I then laid the standard bed mat over top of that. It took two 4x8 sheets to do it. By laying them sideways and cutting them to fit, it allowed me to go the full width of the bed in front and behind the wheel wells (if that makes sense).
